What we make
Harness library
Every harness brief on the site, by line: the mechanism, what it is engineered to, the discipline applied to that one harness, and how it is bought.
No brief carries that word. Clear the search, or choose a line.
UAV The payload-to-carrier seam
Power feed
The feed from carrier to payload, sized on the drawing, protected at the source, and never sharing a shell with a safety contact.
UAVData bus
The bus that carries the payload's traffic, twisted with its own return, shielded end to end and matched along its length.
UAVSafety-interlock set
The chain the carrier trusts before it arms, in its own bundle and its own shell, reading not safe when open, shorted or dead.
UAVGround and bond
The one return path that is drawn rather than discovered, and the bond that is a mechanical fact about metal touching metal.
UAVThe matched set
Power, data, interlock and ground engineered together, keyed together and proven together as one interface.
Autonomy The retrofit loom behind a removable operator
Machine power distribution
How a kit draws power from a machine that was never told it would have a second consumer, and where the protection sits.
AutonomyActuator motor and feedback
The drive to each actuator and the signal that reports where it went, kept apart along the same route.
AutonomyNetwork and fieldbus
The kit's own network and the machine's fieldbus, joined where they must be and kept separate everywhere else.
AutonomyEmergency stop and safety chain
A stop that works whether the fault is in the kit or in the host, with no software able to hold it closed.
AutonomyThe full machine set
Every loom the retrofit needs, built to the machine programme's issued set, with the manufacturing detail returned to it.
Training systems The instrumentation loom inside a capture rig
The sensor loom
Sensing lines to one logger, on one clock, from one battery, wired to nothing on the host machine.
Training systemsThe switch-witness set
The witnesses that record what the operator's hands and feet did, adding no force a person can feel to any control.
Training systemsThe logger and power harness
The rig's own supply and the logger it feeds, isolated from the machine it measures.
Training systemsThe full rig wiring set
The sensor loom, the witness set and the logger harness as one kit that lands on a machine and leaves it unchanged.
Industrial plant and remote sites Pre-wired plant for ground that has no labour
The remote site package
Power and control for ground with no electrician standing on it, wired, labelled and tested in the shop and landed as one unit.
Industrial plant and remote sitesSkid and modular assemblies
Plant built on a skid in the shop, with every internal run terminated and every external landing drawn.
Industrial plant and remote sitesPre-terminated enclosures and interconnect
Enclosures that arrive with the terminations made and the interconnect cut to a walked length.
Industrial plant and remote sitesPlant power and control
Line-voltage distribution and the controls that go with it, built to the issued set and the Canadian Electrical Code.
Industrial plant and remote sitesSite interconnect and the landed kit
The cables between packages and the kit that lands them, so the site's only job is to connect.
Send us the set.
Write with the drawing set or the interface specification you are building to, and what the machine is. We read it before we answer.